ADHESIVE ACTIVATOR SPRAY 310 25.47 gm.
Click To Enlarge

CoolChem Activator 310  is used to increase and assure proper cure  of all cyanopoxy  adhesive with a special catalyst with aggressive cleaning and degreasing properties to remove surface contamination. It can be either pre- or post-applied The product is especially suited for post-application on cyanopoxy adhesive to ensure rapid and complete curing. Pre applying is recommended on porous, large bond gaps, inert surfaces or contaminated surfaces. Excellent for cosmetic application where aesthetic ( clear and transparent fillet) are needed. CoolChem Activator 310 is especially suited for post applied applications.  

 

 

Directions for use:

 

Post Activation

1. Apply Cyanopoxy Integrator to one or both mating surfaces of  parts to be bonded and assemble immediately.  .

 

2. Apply Activator by lightly spraying the CoolChem Activator 310, 6 inches from the assembled or mated parts directly to the exposed Cyanopoxy !integrator bond line on the assembled parts.

 

Surface Activation

1. Apply one coating of CoolChem Activator 310 to one or both mated parts to be assembled in the bond area by

spraying the CoolChem Activator 310 directly on the mated areas  to be bonded. Contaminated surfaces may need

special cleaning or degreasing prior to activation to remove any dissolvable contamination.

 

2. Allow the CoolChem Activator 310 to fully evaporate from parts prior to bonding to avoid solvent entrapment within the bond joint.

 

3. Apply the Coolchem Cyanopoxpy Integrator immediately after drying or not more than 40- seconds thereafter and assemble parts immediately. Where possible, move surfaces in relation to each other for a few seconds on the assembled parts to properly distribute the CoolChem Cyanopoxy integrator for maximum activation. Secure the assembly and await fixturing before any further handling.

 

 

4. The CoolChem Cyanopoxy Activator 310 can be re-applied if necessary if there is a delay of more than 40- seconds between original CoolChem Activator 310 and Cyanopoxy integrator application.

 

Click here for the MSDS sheet

  • Item #: CC310-2

ADHESIVE ACTIVATOR SPRAY 310 25.47 gm.

Price: $13.25
* Marked fields are required.
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review